2) When arm-out operation stopped

23.)Removing the planetary gear C (12)

Fix the flange (1-1) in place, loosen the bolt (14) and then remove it. Remove the thrust plate (13), planetary gear C (12), needle bearing (11), inner lace (10) and thrust plate (9), in that order.

Note:

When loosening the bolt (14), follow the instructions below. a.An anti-loosening screw lock agent is applied on the bolt (14). For that reason, ensure that the flange (1-1) is fixed in place. b.When loosening the bolt (14), use a tool with an adequate arm length using an iron pipe, etc.

Forcible operation may result in damage to the back or other injury to the operator.

24.)Disassembling the holder C (6)

Fix the flange (1-1) in place, loosen the bolt (8) and then remove it.

The holder C (6) is fixed in place with the pin (31) on the flange (1-1). Remove the holder C (6) using a press by installing a removal jig from the motor side.

Note:

When loosening the bolt (14), follow the instructions below. a.An anti-loosening screw lock agent is applied on the bolt (14). For that reason, ensure that the flange (1-1) is fixed in place. b.When loosening the bolt (14), use a tool with an adequate arm length using an iron pipe, etc.

Forcible operation may result in damage to the back or other injury to the operator.

25.)Separating the flange (1-1) and housing (4)

Mount a jig on the edge of the peripheral flange of the housing (4) and press the flange (1-1) with a press to separate the flange (1-1) from the housing (4).

26.)Removing the floating seal (2)

Push up the periphery of floating seal (2) with a flathead screwdriver and remove the floating seal (2).

27.)Safekeeping of parts

The above completes the disassembly procedure. Wash and clean the disassembled parts and put them in plastic bags, etc. after applying generous amounts of anti-rust oil, and then keep them in a cool, dark and dry place.

High humidity and temperature may cause rust even anti-rust oil has been applied.

Also, store the parts as protected against dust attachment.