Linkbelt 210-240 X2 SERVICE MANUAL RST-00-00-001LX - PDF DOWNLOAD

4-9 Maintenance: Electric Equipment Judgment Procedure 1 Voltage Measurement Procedure Items to prepare • Service connectors • Tester

[1]

Use the service connector (female) (1) and the service connector (male) (2) for voltage measurement.

1

2

[2]

Remove the connector (1) for voltage measurement.

1

61

Turn static files into dynamic content formats.

Create a flipbook

Articles inside

3.Upper Side Pilot Valve (remote control valve

2.5-way Solenoid Valve Operation Explanation

5.EPF (Engine Protection Feature

4.Sensor Trouble Operation Table

3.Diagnostic Trouble Code (Monitor display

1.Message Display List

9.Model Setting

10.Engine Screen Information Screen Display Details

8.Anti-Theft Protection Setting

7.Option Flow Setting

6.Check the Monitor Switch (monitor switch check screen

5.CAL (troubleshooting support) Screen

2.DIAG (trouble diagnosis) Screen

3.HR (usage log) Screen List

2.Swing Motor

Screen Display List 1.CHK (status display) Screen List

1.Screen Shift

5.Beacon

1.Travel Motor

4.Return Filter Restriction Detected

2.Regulator

Options 1.Option Line Control

1.Hydraulic Pump

1) Breaker Q control

2) 2nd crusher

1.Breaker Circuit (single operation

4.Second Option Circuit (hydraulic rotation fork

2.Shuttle Circuit (hydraulic thumb

2.Heat Circuit (lever in neutral

2) When arm-out operation stopped

Retightening torque table

ISO type

Increased Horsepower Circuits 1.Arm-In Increased Horsepower Circuit

7.Pressure Limiter

1) Arm-out operation

2.Travel Increased Horsepower Circuit Other Circuits

Maintenance after first 250 hours for new machine / every 1000 hours from then ON 1.Swing Reduction Gear Oil Replacement

Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.