Hagie Hi-Tractor 204 Detasseler Operator's Manual 493401 - PDF DOWNLOAD

Page 255

Series 90 Axial Piston Pumps Technical Information System design parameters SHAFT LOADS

Normal bearing life in B10 hours is shown in the table below. The figures reflect a continuous differential pressure of 240 bar [3500 psi], 1800 min-1 (rpm) shaft speed, maximum displacement, and no external shaft side load. The data is based on a 50% forward, 50% reverse duty cycle, standard charge pump size, and standard charge pressure. Bearing life Frame size Bearing life – B hrs Series 90 pumps are designed with 42 18 060 bearings that can accept external radial 55 22 090 and thrust loads. The external radial 75 22 970 shaft load limits are a function of the 100 22 670 load position and orientation, and the 130 17 990 operating conditions of the unit. 10

The maximum allowable radial load (Re), is based on the maximum external moment (Me), and the distance (L) from the mounting flange to the load. It may be determined using the table and formula below. Thrust (axial) load limits are also shown.

180

16 150

250

12 020

Radial and thrust load position L 0˚Re Re 270˚ Re Tout Tin

90˚ Re

Re = Me / L 180˚Re

Pump swashplate

P104 292E All external shaft loads affect bearing life. In applications with external shaft loads, minimize the impact by positioning the load at 90° or 270° as shown in the figure.

Contact your Sauer-Danfoss representative for an evaluation of unit bearing life if: • continuously applied external loads exceed 25 % of the maximum allowable radial load (Re). • the pump swashplate is positioned on one side of center all or most of the time. • the unit bearing life (B10) is critical. Sauer-Danfoss recommends tapered input shafts or clamp-type couplings for applications with radial shaft loads. Allowable external shaft load

14

250 - 119

Parameter External moment (Me)

042 126

055 101

075 118

100 126

130 140

180 161

250 176

N•m [lbf•in] Maximum shaft thrust in (Tin)

[1114] 2635

[893] 3340

[1043] 4300

[1114] 5160

[1238] 5270

[1424] 7000

[1556] 7826

N [lbf] Maximum shaft thrust out (Tout)

[592] 1020

[750] 910

[996] 930

[1160] 1000

[1184] 688

[1573] 1180

[1759] 1693

N [lbf]

[229]

[204]

[209]

[224]

[154]

[265]

[380]

520L0603 • Rev FB • July 2007


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Technical Information

1min
pages 349-351

Technical Information

1min
page 348

Technical Information

1min
page 343

Ordering Information

1min
pages 341-342

Technical Information

1min
page 339

Technical Information

1min
pages 338-339

Technical Information

1min
pages 335, 337-338

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
pages 330-331

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
page 329

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
pages 328-329

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
pages 327-328

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
pages 326-327

K and L Frame Variable Motors, Cartridge Mount Service Manual Technical specifications

1min
pages 325-326

K and L Frame Variable Motors, Cartridge Mount Service Manual Introduction

1min
pages 323-325

K and L Frame Variable Motors, Cartridge Mount Service Manual

1min
pages 321-322

Series 90 Axial Piston Pumps

1min
pages 273-274

Series 90 Axial Piston Pumps

1min
pages 272-273

Series 90 Axial Piston Pumps Technical Information Control options

1min
pages 271-272

Series 90 Axial Piston Pumps

1min
pages 270-271

Series 90 Axial Piston Pumps

1min
pages 269-270

Series 90 Axial Piston Pumps

1min
pages 267-269

Series 90 Axial Piston Pumps

2min
pages 265-267

Series 90 Axial Piston Pumps Technical Information Control options

1min
page 264

Series 90 Axial Piston Pumps Technical Information Features and options

1min
pages 263-264

Series 90 Axial Piston Pumps Technical Information Features and options

1min
pages 260-261

Series 90 Axial Piston Pumps

1min
pages 259-260

Series 90 Axial Piston Pumps

1min
pages 258-259

Series 90 Axial Piston Pumps

1min
page 257

Series 90 Axial Piston Pumps

1min
pages 255-256

Series 90 Axial Piston Pumps Technical Information System design parameters

3min
pages 253-255

Series 90 Axial Piston Pumps

1min
pages 252-253

Series 90 Axial Piston Pumps Technical Information Technical specifications

1min
pages 250-252

Series 90 Axial Piston Pumps

1min
pages 246-248

Converting the Sp eed Display from MPH to km/h

1min
pages 136-156, 158, 166, 168, 170, 175-177, 179

X. LIMITED WARRANTY

1min
pages 130, 134-135

IX. TROUBLE SHOOTING

1min
page 125

IX. STORAGE

1min
page 112

VII. SERVICE AND MAINTENANCE

1min
pages 110-111

VII. SERVICE AND MAINTENANCE TOE-IN ADJUSTMENT

1min
page 109

VII. SERVICE AND MAINTENANCE

1min
page 108

VII. SERVICE AND MAINTENANCE

1min
page 107

VII. SERVICE AND MAINTENANCE

1min
page 106

VII. SERVICE AND MAINTENANCE

1min
page 105

VII. SERVICE AND MAINTENANCE BELTS

1min
page 104

VII. SERVICE AND MAINTENANCE

1min
page 103

VII. SERVICE AND MAINTENANCE

1min
page 102

ELECTRICAL

1min
page 100

VII. SERVICE AND MAINTENANCE

1min
page 99

VII. SERVICE AND MAINTENANCE LUBRICATION

1min
page 98

VII. SERVICE AND MAINTENANCE

1min
page 97

VII. SERVICE AND MAINTENANCE

1min
page 95

VII. SERVICE AND MAINTENANCE

1min
page 94

VII. SERVICE AND MAINTENANCE

1min
page 93

VII. SERVICE AND MAINTENANCE

1min
page 92

VII. SERVICE AND MAINTENANCE

1min
page 91

VII. SERVICE AND MAINTENANCE

1min
page 89

VII. SERVICE AND MAINTENANCE

1min
page 88

VII. SERVICE AND MAINTENANCE

1min
page 87

VII. SERVICE AND MAINTENANCE

1min
pages 85-86

VII. SERVICE AND MAINTENANCE Service Point

1min
pages 82-83

VI. TRANSPORTING

1min
pages 80-81

VI. TRANSPORTING

1min
page 79

VI. TRANSPORTING

1min
page 77

V. OPERATING INFORMATION

1min
page 75

V. OPERATING INFORMATION

1min
page 74

V. OPERATING INFORMATION

1min
page 71

V. OPERATING INFORMATION

1min
page 70

V. OPERATING INFORMATION

1min
page 69

V. OPERATING INFORMATION

1min
page 67

V. OPERATING INFORMATION

1min
page 66

V. OPERATING INFORMATION DEPTH COMMAND

1min
pages 64-65

V. OPERATING INFORMATION

1min
page 63

V. OPERATING INFORMATION

1min
page 62

V. OPERATING INFORMATION

1min
page 61

V. OPERATING INFORMATION

1min
page 60

V. OPERATING INFORMATION

1min
page 59

V. OPERATING INFORMATION

1min
page 58

V. OPERATING INFORMATION

1min
page 57

V. OPERATING INFORMATION

1min
page 56

V. OPERATING INFORMATION

1min
page 55

V. OPERATING INFORMATION

1min
page 54

V. OPERATING INFORMATION

1min
page 53

V. OPERATING INFORMATION

2min
page 52

V. OPERATING INFORMATION

1min
page 51

V. OPERATING INFORMATION

1min
page 50

V. OPERATING INFORMATION

1min
page 49

V. OPERATING INFORMATION

1min
page 48

V. OPERATING INFORMATION

1min
page 46

V. OPERATING INFORMATION

1min
page 45

V. OPERATING INFORMATION

1min
page 44

V. OPERATING INFORMATION

1min
page 43

V. OPERATING INFORMATION

1min
page 42

V. OPERATING INFORMATION

1min
page 40

V. OPERATING INFORMATION

1min
page 39

V. OPERATING INFORMATION

1min
page 38

IV. PREPARING TO OPERATE

1min
page 37

IV. PREPARING TO OPERATE

1min
page 36

IV. PREPARING TO OPERATE

1min
page 35

IV. PREPARING TO OPERATE ATTACHING QUAD PULLERS

1min
page 32

IV. PREPARING TO OPERATE ATTACHING LIFT ASSEMBLIES

1min
page 31

IV. PREPARING TO OPERATE ATTACHING OPTIONAL COMPONENTS

1min
page 29

IV. PREPARING TO OPERATE TOE-IN

1min
page 28

IV. PREPARING TO OPERATE

1min
page 27

IV. PREPARING TO OPERATE

1min
page 26

IV. PREPARING TO OPERATE

1min
page 25

I. SAFETY/DECALS

1min
pages 14-17

I. SAFETY/DECALS

1min
pages 9-10

I. SAFETY/DECALS

1min
page 8

I. SAFETY/DECALS SAFETY PRECAUTIONS

1min
page 7

TO THE OPERATOR

1min
page 5
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.