V. OPERATING INFORMATION

GAUGES CONTINUED

Speedometer/Tachometer Display Screen Quick Referen ce Chart

Hold down the left (RPM) button until the display with four “8’s” appears, then release and parameter setting will appear.

Hold down both buttons until the display with four “8’s” appears, then release and parameter setting will appear.

Hold down the right (MPH) button until the display with four “8’s” appears, then release and parameter setting will appear.

Press RPM button to increase setting; value will be saved if no button is pushed for 5 seconds.

Press RPM button to scroll through miscellaneous parameters settings:

P3 = power-up display

P4 = signal tracking speed

P5 = input device

Press RPM button to increase setting; value will be saved if no button is pushed for 5 seconds.

Press MPH button to decrease setting; value will be saved if no button is pushed for 5 seconds.

Press MPH button to change setting of displayed parameter (0 or 1); P3 may be 0 or 1 (0 displays RPM on power-up and 1 displays MPH on power-up); P4 should be set to 1: P5 should be set to 1.