Table 17: Maintenance Log Date
Hours
Maintenance Procedure
General Lubrication Important: Use of lubricants not corresponding to manufacturer recommendations may invalidate warranty claims. Always dispose of waste lubrication oils and hydraulic fluids according to environmental laws or take to a recycling center for proper disposal. DO NOT pour fluids onto the ground or down a drain.
See “Fluid Capacities/Lubricants” on page 115 for proper grease specifications. Wipe dirt from the fittings before and after applying grease to prevent contamination. Replace any missing or damaged fittings. Avoid excessive greasing to minimize dirt build-up.
Lubricate Daily or After Every 10 Hours of Operation
A
C
B
E
D
A. Front lift cylinder grease fittings (2). B. Top lift arm grease fittings (2). C. Back lift cylinder grease fittings (2). D. Attachment hitch pivot points (2) – NOTE: Lubricate (D) from inside of pin. E. Bottom tilt cylinder grease fittings (2).
84
50950503/E0521
