CHAPTER 8 SPECIFICATIONS Fluid Capacities/Lubricants Table 30: Fluid Capacities/Lubricants Component/Application
Type Refer to the Engine Operator’s Manual for specific engine oil recommendations. Service Classification: APICK-4 preferred, API-CJ-4 SM acceptable. Conventional oils - select the oil viscosity based on the ambient temperature where the engine is being operated. See SAE viscosity chart.
R135
R150
6.4 L (6.8 qts.) (w/out filter)
6.2 L (6.5 qts.) (w/out filter)
Full Synthetic Oil 0W-40. Do not mix oil types.
Engine Oil (with filter)
Hydraulic Oil Tank
Petro Canada HVI60, Mobil DTE 15M or equivalent, which contain anti-rust, anti-foam and anti-oxidation additives, and conforms to ISO VG46.
34.8 L (9.2 gal.)
39.0 L (10.3 gal.)
Hydraulic System – Total
HVLPD 46 (HYD0530)
51.9 L (13.7 gal.)
59.8 L (15.8 gal.)
Biodegradable oil: AVILUB Syntofluid Grease Fittings, Lift Arm Battery Terminals
46; PANOLIN HLP Synth 46 Lithium-saponified, brand-name multi-purpose grease MPG-A SP-B acid-proof grease DPF Models: ULSDa ultra-low sulfur only, below 15 PPM.
Diesel Fuel Tank
ASTM D975 with biodiesel content limited to 5% of DIN EN14214 type (no additives allowed!) Non-DPF Models:
As Required As Required 59.4 L (15.7 gal.)
62.5 L (16.5 gal.)
59.4 L (15.7 gal.)
62.5 L (16.5 gal.)
ASTM D975-94 (no additives allowed!) DIN EN14214 Biodiesel (no additives allowed!) a
Engine Coolant Radiator Cap Pressure Chaincase (per side) Motor Gearbox
50950503/E0521
LSD or ULSD low sulfur or ultra-low sulfur, below 500 PPM. Up to 5% (B5) mixture of BioDiesel allowed Long life coolant ASTM D4985, D6210 (United States) SAE J814C, J1941, J1034 or J2036 (international)
7.9 L (2.1 gal.)
(See “Coolant Compound Mixtures” on page 118) N/A 1.0 bar (15 psi) SAE grade 10W-30 motor oil 7.1 L (7.5 qts.) 9.2 L (9.4 qts.) Drive motor mechanism lubricated by hydraulic system oil.
115
