E 01 Set-up and modification 1 Special note on safety
Inadvertently starting the engine, the traction drive, the conveyor, the auger, the screed or the lifting units can be dangerous. Unless specified otherwise, work may only be performed when the engine is not running! -
-
To protect the paver against inadvertent starting: Set the drive lever to the center position and set the preselector to zero; if applicable, pull out the ignition key and the battery main switch Secure lifted machine parts (e.g. screed or hopper) against lowering by means of mechanical supports. Replace parts or have them replaced as required.
When connecting or disconnecting hydraulic hoses and when working on the hydraulic system, hot hydraulic fluid can escape at a high pressure. Switch the engine off and de-pressurize the hydraulic system! Protect your eyes! -
-
Mount all protective and safety devices before re-commissioning the paver. The walking platform must always reach over the entire width of the screed. The hinged walkway (optional for all variable screeds) may only be swung up under the following circumstances: When paving next to a wall or a similar obstacle. During transportation on a low-bed trailer.
E1
