F 1.0 Maintenance

1 Notes regarding safety

Maintenance work: Maintenance work may only be carried out when the engine is not running.

Secure the paver and the attachments against inadvertent starting before beginning any maintenance work.

- Set the drive lever to the center position and the speed preselector to zero.

- Remove the ignition key and the battery main switch,.

Lifting and jacking up: Secure lifted machine parts (i.e. screed or hopper) against lowering by means of mechanical supports.

Spare parts: Use only approved parts and install them according to the specifications! If no doubt, contact the manufacturer!

Re-commissioning: Mount all protective devices before re-commissioning the paver.

Cleaning: Cleaning must not be carried out while the engine is running. Do not use any flammable substances (such as gasoline or diesel fuel).

Avoid directly cleaning electrical parts and insulation material with a steam jet; cover them up beforehand.

Working in closed environments: Always run the engine in a well-ventilated area.

In addition to these Maintenance Instructions, the Maintenance Instructions of the engine manufacturer must always be observed. All other maintenance work and intervals noted in these instructions are also binding