OPERATING INSTRUCTIONS
PARKING THE MACHINE Template Name: OM_1_col Template Date: 1994_04_29
STEP 1
STEP 5
Park the machine on a flat, level surface away from any soft ground or excavations.
Stop the engine, remove the starter switch key and release the hydraulic pressure. See “Releasing the pressure in the hydraulic system” in the “Lubrication/Filters/Fluids”.
STEP 2 Lower the loader bucket to the ground.
STEP 6
STEP 3
Lock the operator's compartment doors.
Engage the parking brake and place the direction of travel control lever and gear change lever in neutral position. STEP 4
TRIM THIS EDGE
Place the backhoe attachment in the road travel position. See "Setting the backhoe attachment in the road travel position”.
STEP 7 Disconnect the electrical system by means of the battery master switch key. STEP 8 If the machine is parked outdoors, cover the exhaust pipe so as to protect the engine against damp.
!
WARNING : Check that no part of the machine is protruding onto the public highway. If this cannot be avoided, install signs in accordance with regulations.
Alt= to hide template information Alt+ to display template information 158
TRIM THIS EDGE LEFT PAGE
