MANUAL OPERATION OF THE LOADER ARMS

Template Date: 1994_04_29Template Name: OM_1_col

Alt+ to display template informationAlt= to hide template information

TRIM THIS EDGE

STEP 1

PARKING THE MACHINE

STEP 5

Park the machine on a flat, level surface away from any soft ground or excavations.

STEP 2

Lower the loader bucket to the ground.

STEP 3

Engage the parking brake and place the direction of travel control lever and gear change lever in neutral position.

STEP 4

Place the backhoe attachment in the road travel position. See "Setting the backhoe attachment in the road travel position”. Stop the engine, remove the starter switch key and release the hydraulic pressure. See “Releasing the pressure in the hydraulic system” in the “Lubrication/Filters/Fluids”.

STEP 6

Lock the operator's compartment doors.

STEP 7

Disconnect the electrical system by means of the battery master switch key.

STEP 8

If the machine is parked outdoors, cover the exhaust pipe so as to protect the engine against damp.

WARNING : Check that no part of the machine is protruding onto the public highway. If this cannot be avoided, install signs in accordance with regulations.

158

TRIM THIS EDGE

LEFT PAGE