STARTING UP SAFETY DEVICES

Template Date: 1994_04_29Template Name: OM_1_col

Alt+ to display template informationAlt= to hide template information

TRIM THIS EDGE

STEP 10

CP99D009 Turn the starter switch key to the pre-heat position and hold it there. IMPORTANT : For a temperature over 5°C, hold the key in the pre-heat position for ten seconds. For a temperature of between -5°C and +5°C, hold the key in position for twenty seconds. For a temperature below -5°C, hold the key in position for thirty seconds. Never hold the key in the pre-heat position for more than one minute.

STEP 11

IMPORTANT : Do not operate the starter for more than 30 seconds at a time. Do not operate the starter when the engine is running.

STEP 12

When the engine is running check the indicators and indicator lamps to make sure that all systems are operating correctly.

STEP 13

Using the accelerator pedal, run the engine at half speed until it has reached normal operating temperature. NOTE : Do not run the engine at idle for too long, since this may cause the formation of deposits in the oil. Whenever conditions of use and safety allow it, run the engine at maximum speed.

CP99D009 Turn the key to the starting position. Release the key as soon as the engine starts. If the engine stops, wait about one minute before starting the operation again.

124

TRIM THIS EDGE

LEFT PAGE