1 minute read
MANUAL OPERATION OF THE STEERING CONTROLVALVE
TOWING THE MACHINE
The machine should only be towed when it is undriveable. First of all make sure that it can be towed without causing further damage. Whenever possible carry out the repair at the site or consult your CASE Dealer. If the machine is on the public highway, make sure that no component of the machine projects onto the highway. If this cannot be avoided, install signs in accordance with regulations.
WARNING : Towing is a delicate operation which is always performed at the risk of the user. The manufacturer’s guarantee does not apply to incidents or accidents occurring during towing. Whenever possible, carry out the repair at the location, without towing the machine.
WARNING : The machine must be towed very slowly (16 kph maximum), over a short distance and only if it is really necessary.
WARNING : It is essential for a tow bar to be used for towing the machine.
WARNING : When towing the operator must be alone on the machine. Make sure that no other person is on the machine or within the machine’s working range.
OPERATING THE MACHINE IN WATER
1. Make sure that the bed of the stream or stretch of water can support the weight of the machine.
2. The level of the water must not exceed the height of the centre of the front wheels.
IMPORTANT : Never work in water if the water level is higher than the centre of the front wheels.
3. Before taking the machine into the water, pump plenty of new grease into the machine’s attachment linkages. IMPORTANT : Never work in fast-flowing water.
157
TRIM THIS EDGE
RIGHT PAGE TRIM THIS EDGE
