OPERATING INSTRUCTIONS IMPORTANT : Do not operate the starter for more than 30 seconds at a time. Do not operate the starter when the engine is running.
STEP 10
Template Name: OM_1_col Template Date: 1994_04_29
STEP 12 When the engine is running check the indicators and indicator lamps to make sure that all systems are operating correctly. STEP 13 CP99D009
Turn the starter switch key to the pre-heat position and hold it there.
TRIM THIS EDGE
IMPORTANT : For a temperature over 5°C, hold the key in the pre-heat position for ten seconds. For a temperature of between -5°C and +5°C, hold the key in position for twenty seconds. For a temperature below -5°C, hold the key in position for thirty seconds. Never hold the key in the pre-heat position for more than one minute.
Using the accelerator pedal, run the engine at half speed until it has reached normal operating temperature. NOTE : Do not run the engine at idle for too long, since this may cause the formation of deposits in the oil. Whenever conditions of use and safety allow it, run the engine at maximum speed.
STEP 11
Alt= to hide template information Alt+ to display template information
CP99D009
Turn the key to the starting position. Release the key as soon as the engine starts. If the engine stops, wait about one minute before starting the operation again.
124
TRIM THIS EDGE LEFT PAGE
