Service work
Oil filter. Change NOTE! Change the filter during each oil change. WARNING! Hot oil and hot surfaces can cause burns. 1. Put a suitable container under the filter to collect any spilled oil.
2. Unscrew the cover from the oil filter.
1 2
3. Wait a few minutes to allow the oil to run out of the filter.
4. Change the filter insert (1).
5. Install a new O-ring (2), tighten the cap by hand. Please refer to the oil filter cover for the correct torque.
6. Start the engine (low idle) and check that there are no oil leaks. Stop the engine and check the oil level again. Please refer to “Engine oil, change”.
39
