Toothed belt pulley

15.Install a new seal (1) on tool 9995455.

Install the tool with the seal on the crankshaft.

Turn the center nut until the seal is in place. NOTE! The crankshaft must not rotate during the pressing operation, or the seal ring could be damaged.

16.Check that the seal ring is level with the outer edge of the swage on the oil pump.

IMPORTANT! The seal ring dust lip is easily stretched and does not spring back again. If it has been incorrectly aligned or has been forced in, it must be changed.

16. Toothed belt pulley

Install the toothed belt on the crankshaft. The pulley and the crankshaft have specially designed splines and can only be installed one way round.

Tap the toothed belt pulley on with a plastic faced mallet.

The toothed belt pulley can be pre-heated to 100°C to facilitate assembly.