Flywheel with cover and coupling

33.Undo the cylinder head screws. Start to undo them, working from the outside towards the center.

Undo the cylinder head and put it on a clean, dry, soft surface. NOTE! Save the gasket or note its marking, please refer to “Engine, assembly, cylinder head”.

IMPORTANT! The gasket plane and the plugs beside the valve heads must not be damaged. The gasket is basically unable to seal a scratch or other damage to the sealing plane.

34. Flywheel with cover and coupling. Unscrew the hot water outlet (1).

36.Unscrew the clutch (1) screws (2) and remove the clutch.

37.Unscrew the flywheel, using 12-tooth bit 885823 and remove the flywheel. NOTE! The flywheel is heavy. Be careful when handing it.