CNH Leica Geosystems Moldboard 800C 836C 836C AWD 856C 856C AWD F156.8A Motor Instructions Manual

Page 18

4 - ASSEMBLY

16. Install the fitting (27) on the rear fitting (3) (port “P”) installed on the blade control valve (2). 17. Connect the hydraulic hose (10) to the fitting (27).

LEIL16GRD0029AB

12

LEIL16GRD0030AB

13

LEIL16GRD0031AB

14

LEIL16GRD0032AB

15

18. Locate the block valve on the right-hand side of the machine. Disconnect the hose (W) from the fitting installed on the port “S2” of the block valve.

19. Install the socket tee (22) on the fitting installed on the port “S2” of the block valve. NOTE: for clarity, figure 14 does not show the brake hoses.

20. Connect the loose end of the hose (10) and the hose (W) to the socket (22), as shown on figure 15. NOTE: for clarity, figure 15 does not show the brake hoses.

18 EN

Turn static files into dynamic content formats.

Create a flipbook

Articles inside

Insulate the battery terminals

1min
page 20

Remove the three screws with the relevant washers

1min
page 21

Locate the batteries the right - hand side the ma chine. Remove the four screws (R) with the relevant washers and nuts. Remove the battery cover (S) .

1min
page 16

Disconnect the positive terminal the battery

1min
page 19

Remove the six bolts (T) . Remove the cover (U) the top the front frame.

1min
page 15

Remove the jumper cable between the batteries

1min
page 18

Remove the bolts (N) with the relevant washers and nuts. Remove the bolt (P) with the relevant washer . Remove the cover assembly (Q) the front frame.

1min
page 14

Remove the side panels (K) from the cab floor

1min
page 12

Disconnect the negative terminal the battery

1min
page 17

Loosen the mounting bolts (L) and remove the cover (M) the hydraulic lines.

1min
page 13
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.