4 - ASSEMBLY
11. Pre-assemble the two 90° elbows (24), the fitting (18) and the shuttle valve (19), as shown in figure 9. 12. Install the assembly of the two 90° elbows (24), the fitting (18) and the shuttle valve (19) on the port “X” of the hydraulic pump.
LEIL16GRD0026BB
9
13. Connect the loose end of the hose (17) to the upper 90° elbow (24) installed on the hydraulic pump. NOTE: route the hose (17) on the right-hand side of the engine compartment. 14. Connect the hose (V) to the shuttle valve (19) installed on the hydraulic pump.
LEIL16GRD0027AB
10
LEIL16GRD0028AB
11
15. Pass the hydraulic hose (10) through the engine compartment: from the left-hand side of the machine to the blade control valve (2) on the rear. NOTE: this operation requires two people.
17 EN
