BI620123
Service Manual
SAFETY PRECAUTIONS The following safety precautions are not intended to be exhaustive. Safe work practices should be used when servicing or operating heavy machinery. ALWAYS
isolate the machine/implement before working on any RAS attachment.
ALWAYS
follow the site tagging and isolation procedures.
ALWAYS
follow site transport rules.
ALWAYS
relieve the attachment quick connect line pressure via the button valve on the dash panel before disconnecting from the attachment.
ALWAYS
disconnect the hydraulic lines to the RAS lock cylinder once the attachment is in place to ensure that the attachment is not accidentally released. The lock cylinder hydraulic lines can either be connected to the hydraulic system of the attachment or to the dummy blocks located on the lift arm assembly.
ALWAYS
isolate the machine/implement before working on any RAS attachment.
ALWAYS
remove the attachment from the RAS attach plate when raising the lift arm for maintenance.
ALWAYS
install the lift arm lock when access under the lift arm assembly area is required. Remove any RAS attachment before raising and locking the lift arm assembly.
ALWAYS
use extreme caution when tramming the machine with the attachment raised.
ALWAYS
lower the load as close as possible to the ground when tramming.
NEVER
walk underneath a raised lift arm with the bucket or other attachment connected.
NEVER
load the attachment beyond the rated load carrying capacity.
Rev. 0
FBL-10 LHD/Utility Serial No. 80042
309
