BI017763
OPERATING INSTRUCTIONS 6030, 6030FS Inspection and servicing ENGINE Engine - Safety instructions Start and operate combustion engines only on well-ventilated premises. In closed rooms, exhaust gases must be evacuated to the outside. Do not work on the exhaust system an do not make any modifications to it. Exhaust gases from diesel engines and some of their constituents may cause cancer, birth defects and other reproductive harm. Read and observe: "Inspection and Servicing – Safety Instructions" and the engine operating instructions. Risk of injury from hot or rotating parts of the engine.
Before starting inspection and maintenance work, secure the machine as described in the “Securing the machine “ section.
Shut off engines and allow to cool down.
Other servicing works are described in the engine manufacturer's operating instructions.
Secure the machine as described in the "Securing the machine" section. Protect the skin from potentially harmful contact with engine oil. Wear protective gloves and firm working clothing.
3-40
Attention, ETHER The engine compartment can be equipped with pressure vessels containing cold-starting fluid (ether). Ether is toxic and highly flammable; the vessels are under pressure. These pressure vessels can explode if exposed to high temperatures (above 49°C / 120°F) or in the event of damage. Protect the pressure vessels against damage before beginning to work in or close to the engine compartment.
Before cleaning the engines Exhaust pipes and turbo chargers in the engine compartments are covered with special heat-insulating material. This material must not be spraywashed with steam-jet cleaners or high-pressure cleaners. It will be damaged. Therefore cover all the insulating material with plastic foils before using steam-jet cleaners or highpressure cleaners inside the engine compartments.
BA RH120E(3 725 097.01)-EN
