OPERATING INSTRUCTIONS 6030, 6030FS Operation

(Fig. 2-62:)

No. Element Function Symbol

101 Push-button (Free for options) Can be used as a push-to-speak button on a radio, or to switch over from one camera to another one, or to switch on / off the water spraying system.

102 Push-button Stick floating position (shovel equipment only)

Button is pressed: The stick cylinders are pressurized on retracting.

Press button (102) only in position "0" of control lever (115).

103 Push-button Boom floating position

Button is pressed: The boom cylinders are pressurized on retracting.

Press button (103) only in position "0" of control lever (116).

104 Push-button Warning signal

105 Push-button inside the seat

Electronic excavator control (servocontrol)

Button is pressed: Acoustic warning signal / horn is activated.

The electronic excavator control (servocontrol) is activated when the drivers sits down on the seat.

The electronic excavator control (servocontrol) is deactivated when he leaves the seat.

Forwards – shovel trap is opened; Backwards – shovel trap is closed.

Travel, right track Forwards – forward travel; Backwards – backward travel. 114 Footrest

115 Control lever

Forwards – raising the stick Backwards – lowering the stick.

To the left / right –slewing and braking of the superstructure. 116 Control lever Forwards – lowering the boom; Backwards – raising the boom.

To the left – backwards tipping of shovel / bucket;

To the right – dumping of shovel / bucket.

117 Push-button

Not used on this machine.

Turn Forwards – shovel trap is opened; Turn Backwards – shovel trap is closed. Function can be overridden by Pedal 111. (Thumb wheel is spring centered). 119 Push-button By-pass for the automatically switch off for stickand /or backhoe cylinders (Option)

118 Thumb wheel Shovel trap (shovel equipment only)

Lower half pushed – automatically stopped stick- and/or backhoe cylinders can be driven slowly to the limit stopps.

Upper half pushed – Each press on the button increments the loaded dumper count for by "1". (Count reset with button (91)).

120 Thumb wheel

Not used on this machine.