1 minute read
OPERATING INSTRUCTIONS 6030, 6030FS Operation
Working
When released, all control levers for working operation return automatically to position "0".
Sound the horn to warn persons in the immediate vicinity before starting work.
Level a surface only in the bucket's digging direction. Never "beat" or "sweep" with the bucket.
Do not level off a surface with the front shell of the bucket open. Close bucket completely before beginning to dig.
Do not exceed the maximum machine inclination (see “Maximum machine inclinations” chapter).
Extending and retracting the bucket or backhoe bucket stick
To extend the stick: push control lever (115, Fig. 2-127:) forwards.
To retract the stick: pull control lever (115) backwards.
To retract the stick with pressure: (only on bottom-dump bucket equipment) depress button (102) and push control lever (115) backwards.
Opening and closing the bottom-dump bucket
To open the bucket: press pedal (111, Fig. 2-127:) forwards or turnthumb wheel (118) forwards.
To close the bucket: press pedal (111) backwards or or turnthumb wheel (118) backwards. Pressing pedal (111) overrides turning the thumb wheel (118).
Raising and lowering the boom
To raise the boom: pull control lever (116, Fig. 2-128:) backwards.
To lower the boom: push control lever (116) forwards.
To lower the boom with pressure: depress button (103) and push control lever (116) forwards.
Filling and emptying the bucket or the backhoe
To fill/tip back the bucket: shift control lever (116, Fig. 2-128:) to the left.
To empty the bucket by dumping/tipping: shift control lever (116) to the right.
