OPERATING INSTRUCTIONS 6030, 6030FS Operation

Swinging the superstructure

Swinging of the superstructure is only possible when the superstructure holding brake is released and when the excavator driver is sitting on his seat.

 To swing the superstructure to the rightcontrol lever to the right (115, Fig. 2-125:).

 To swing the superstructure to the leftcontrol lever to the left (115).

After releasing, the control lever returns automatically to position "0".

Releasing the control lever (115) is not sufficient to brake the superstructure automatically. In order to brake the superstructure, the control lever must be moved in the direction opposite the slewing movement (reversing).

Braking the superstructure

The superstructure can only be braked by moving control lever (115) in the direction opposite the slewing movement (reversing).

The superstructure does not stop automatically by simply releasing the slewing control lever (115).

To brake the superstructure, the slewing control lever (115) must be moved in opposite direction.

In an emergency, activate the holding brake by pressing switch (61, Fig. 2-126:).