OPERATING INSTRUCTIONS 6030, 6030FS

Inspection and servicing

Removal and installation

 Unscrew nut (1, Fig. 3-36:) and remove cover (2).

 Unscrew nut (4) and withdraw main filter element (5). Do not loose the washer under nut (4).

 Replace or clean main filter element.

New or cleaned main filter elements should always be at hand to shorten excavator downtimes.

Before installing the filter element, clean contact faces at cover (2) and at filter housing.

 Put on cover (2) and tighten nut (1). During the removal of the main filter element, the safety element (7, Fig. 3-37:) must remain in the filter housing.