OPERATING INSTRUCTIONS 6030, 6030FS

Inspection and servicing

 Loosen bolts (13, Fig. 3-83:) and take off spring clip (14) and disk (15).

 Remove basket (12) and clean in paraffin oil.

 Install basket (12).

 Insert filter element (9) together with sealing ring (11) and cap (8) with sealing ring (10).

 Refit cover (3).

 Clean the magnetic rod. The magnetic rod is located under cap (19). If metal filings are detected, locate cause and rectify.

Contact the CGM HMS Service, if required.

 Replace also the return-flow filter in the filter housing (cooling-system).

The return-flow filters are located under the caps (10, Fig. 3-84:).

(See: "Replacing the hydraulic oil return-flow filters (filter housing“).