OPERATING INSTRUCTIONS 6030, 6030FS Operation

(Fig. 2-60:)

All switches and pushbuttons have an illuminated symbol face. The opposite side is equipped with an LED. The LED lights up when the switch / pushbutton is actuated.

No. Element Function Symbol

71 Switch Servo-control

72 Switch Travelling speed

Press the switch face with the symbol: The electro-hydraulic servo-control is enabled.

Not actuated: 1st travelling stage travelling forwards / backwards is possible Press the switch face with the symbol: 2nd travelling stage, only parallel forward travel is possible. in case of backward travel and cornering, the machine switches back automatically into the 1st travelling stage.

73 Not connected.

74 Monitoring lamps Engine oil interval prolongation Lamp is lit up, when the right or the left pump of the prolongation system is running.

75 Not connected.

76 Push-button When the machine has to be manoeuvered out of dangerous situations

Press the switch face with the symbol: The machine can be driven and the superstructure be slewed although these functions are automatically deactivated. Use this function only in dangerous situations to manouever yourself or the machine out of hazard zones. Risk of damaging parts of the machine, e.g. the hydraulic ladder or the tanklift.

81 Switch Floodlamps Switches the floodlamps on the driver´s cab on and off.

82 Switch Floodlamps

Switches the floodlamps on the hydraulic oil cooler module on and off.

83 Switch Floodlamps Switches the floodlamps on the cab module on and off.

84 Switch Floodlamps Switches the floodlamps on the boomon and off.

85 Switch Floodlamps rear Switches the floodlamps on the counterweight on and off.

86 Switch Not connected.