OPERATING INSTRUCTIONS 6030, 6030FS Inspection and servicing

Replacing a defective Xenon-lamp

Read and observe the: „Floodlight projector, replacing the lamp, Safety instructions“.

 Switch off the projector, shut off the engine and cut out the battery main switch.

 Wait until the housing of the floodlight projector has cooled down.

 Withdraw the power supply connector from the projector.

 Remove four bolts (1, Fig. 3-67) and withdraw the reflector (2) from the projector housing.

 Withdraw connector (Fig. 3-68) from Xenon lamp socket.

 Unscrew Xenon lamp holding clamp (Fig. 3-69).

 Remove the defective Xenon lamp and replace by a new one. Do not touch the glass bulb of the lamp.

 Reinstall the new lamp. Screw lamp holding clamp back in place.

 Plug the power supply connector onto the lamp.

 Re-assemble the housing.