OPERATING INSTRUCTIONS
CHOICE OF TOOLS ON A HYDRAULIC BREAKER (optional) Template Name: OM_1_col Template Date: 1994_04_29
Selection of standard and special tools to suit each application are available. The correct type of tool must be selected to get the best possible working results and longest life time for the tool. Choosing the best tool type for an application may require some testing. See your CASE Dealer.
Chisel and moil
Spade tool
- For sedimentary (e.g. sandstone) and weak metamorphic rock into which the tool penetrates. - Concrete. - Trenching and benching.
- Frozen or compact ground Asphalt.
Blunt tool TRIM THIS EDGE
- For igneous (e.g. granite) and tough metamorphic rock (e.g. gneiss) into which the tool doesn’t penetrate. - Concrete. - Breaking boulders.
Compacting plate - Ground compacting. It is important to choose a tool, which is suitable for your breaker and for the intended application. The choice of tool depends on the hydraulic breaker model. See “Hydraulic breaker” in the “Specifications” Section.
Alt= to hide template information Alt+ to display template information 118
TRIM THIS EDGE LEFT PAGE
