1 minute read
MATERIAL DENSITY/HANDLING TABLE
Without dozer blade
Distance
Dippers Buckets 1.50 m 3.00 m 4.50 m 6.00 m 7.50 m 3.00 m 360 kg 4835* (1)3580* (1) 2210* 1610 1160 2.50 m 420 kg 5450* (1)4470* (1) 2370* 1620 2.10 m 450 kg 9995* (1)4750* (1) 2500 1640 -
The loads given are valid for the total working range height at the reach point indicated.
With dozer blade
Distance
Dippers Buckets 1.50 m 3.00 m 4.50 m 6.00 m 7.50 m 3.00 m 360 kg - 3580* (1) 2210* 1700 1230 2.50 m 420 kg - 4473* (1) 2365* 1710 2.10 m 450 kg - 4980 (1) 2625 1725 -
The loads given are valid for the total working range height at the reach point indicated.
IMPORTANT: For machines up to serial number DCH1300336, always attach the load to the connecting rod/bucket linkage pin when the values shown in these charts are followed by a (1). Never use the load handling eye on the bucket connecting rod for loads greater than 3000 kg (2941 daN). For machines with serial numbers DCH1300337 and above, use the load handling eye on the bucket connecting rod for all the values given. See “Load handling eye” in the “Controls/Instruments/ Accessories” Section.
TRIM THIS EDGE
213
TRIM THIS EDGE
RIGHT PAGE
