TRANSPORTING THE MACHINE

Template Date: 1994_04_29Template Name: OM_1_col

Alt+ to display template informationAlt= to hide template information

TRIM THIS EDGE

MACHINE TRAVEL

WARNING: In the normal travel position, the operator’s compartment is above the idler wheels and the travel reduction gears are to the rear of the upperstructure. If the upperstructure is turned 180° in relation to the undercarriage, lever functions are reversed.

IMPORTANT: Before undertaking any travel, raise the attachment and the dozer blade (if fitted). NOTE: Travel speed depends on the tilting angle of the travel control levers and pedals and the speed travel mode selected. See “Travel speed selector pedal” in the “Controls/Instruments/Accessories” Section.

Traveling in a straight line (forwards) Traveling in a straight line (in reverse)

CS98M546 Press the two pedals (or push the two levers) forwards at the same time.

CS98M547 Press the two pedals (or push the two levers) rearwards at the same time.

96

TRIM THIS EDGE

LEFT PAGE

Turning to the left (forwards)

CS98M548 Simply press the right-hand pedal (or push the right-hand lever) forwards.

Turning to the right (forwards)

CS98M551 Simply press the left-hand pedal (or push the left-hand lever) forwards.

Turning to the left (inreverse)

CS98M549 Simply press the right-hand pedal (or push the right-hand lever) rearwards.

Turning to the right (inreverse)

CS98M550 Simply press the left-hand pedal (or push the left-hand lever) rearwards. TRIM THIS EDGE

97

TRIM THIS EDGE

RIGHT PAGE

Alt= to hide template informationAlt+ to display template information

Template Name: OM_1_colTemplate Date: 1994_04_29