OPERATING INSTRUCTIONS
!
WARNING: Never put your hands inside the quick coupler if the engine is running.
Assembly STEP 1
STEP 4
2
1
CK99G002
CK99H001
Install the quick coupler on the dipper and on the connecting rod using the CASE pins (1) supplied and connect the hydraulic connections.
Operate the dipper control lever so as to bring the quick coupler hook (1) around the tool pin (2). STEP 5
TRIM THIS EDGE
1
Alt= to hide template information Alt+ to display template information
QUICK IMPLEMENT INSTALLATION AND REMOVAL (optional)
STEP 2 Make sure that the tool to be installed is in a safe position on flat, level ground and is equipped with its CASE genuine pins.
CK99G001
Place the switch in the unlocked position. See “Quick coupler locking and unlocking control switch” in the “Controls/Instruments/Accessories” Section. CK97A009
Remove the safety shaft and the locking pin. 107
TRIM THIS EDGE RIGHT PAGE
Template Name: OM_1_col Template Date: 1994_04_29
STEP 3
