Case 845B 865B 885B Grader Operator's Manual 84300294 - PDF DOWNLOAD

Page 205

Chapter 12

WARRANTY TERM OF WARRANTY CASE Products - Construction Line

CNH – LATIN AMERICA LTDA., manufacturer of CASE equipments warrants all its new products against any defects of workmanship or material through its new work of authorized dealership. The authorized dealer will repair in his own installation the equipment or any part of the equipment; which according to the technical analysis presents a failure or material defect, at not cost for the end user, including the labor for the installation of the part in reference for a period of 12 (twelve) months unlimited hours beginning from the date of delivery. This warranty does not include, expenses such as transport of this equipment or its components to the installations of the Distributor, as well expenses such as stay and travel if the end users decides to get the work done outside the Dealer’s installation. In this case the Authorized Dealer must present by writing to the customer an estimated cost for his previous approval. The contractual warranty of the equipment is subject to the execution of all scheduled service, as defined in the manual of operation and maintenance performed by authorized service personnel of CASE, including the delivery of technical. Parts installed as replacement will be covered under the remaining warranty period. Original parts purchased through a CASE Dearlership will also have a warranty of 90 (ninety) days from the invoiced date of purchase, under the same parameters of CASE warranty policy. If applied by authorized dealer, original parts, will have a warranty of (180) days. This warranty is subject to the realization of the technical delivery. THIS IS THE ONLY WARRANTY OFFERED AND REPLACES ANY OTHER EXPRESSED OR IMPLIED. THERE ARE NOT OTHER WARRANTY OF CNH WHICH WILL SURPASS THE HERE STATED­. EXCLUSIONS AND LIMIT LIMITATIONS TIONS – This warranty would not apply in case of: •• Verify through the technician analysis, THE IMPROPER USE OR MAINTENACE, NEGLET, INCAPACITY OR ACCIDENT, IN ADDITION TO IMPLEMENTS AND/OR PARTS NOT CERTIFIED BY CNH, AND/ OR USE OF NONRECOMMENDED LUBRICANTS AND OILS; •• New products which are subjected to operations which exceed the recommended capacity or is used for applications no recommended; •• Equipments that have been altered or repaired in a way not authorized by CNH, the manufacturer of CASE products; •• Equipment to which preventive maintenance or inspections have not been done according the specification established for CASE equipment. •• Components which are covered by their own manufacturer such as tires, electrical components, and fuel injection components. •• Defects caused by modification or installation of parts or components no authorized by CNH. Manufacturer or CASE products. •• Monetary Loss, inconvenience, commercial or consequent damaged caused by a failure or cost caused by rented equipment. •• Normal wear items such as: brakes discs, clutches, cutting edges, cutting knife, bolt, lubricated joints(pins, bushing), parts wear due to ground contact, oils, lubricants, exhaust or associated parts, injectors, belts, lamps, glasses, light bulbs and fuses. •• THE RESPONSABILITY OF CNH OR THE AUTHORIZED DEALER, be by civil contract or imply warranty, declaration, instructions or effects of any source, will be limited to the repair or delivery of the parts, new or reconditioned, under the conditions previously stated.­ CNH – LATIN AMERICA LTDA. CNH Latín América Ltda reserves the right to revise, modify or discontinue any product at any time without implying to do the same to products already marketed.

199


Turn static files into dynamic content formats.

Create a flipbook

Articles inside

TERM OF WARRANTY

2min
pages 205-206

PRECAUTIONS TO BE TAKEN BEFORE PERFORMING ANY WELDING PROCEDURE ON THE MACHINE

2min
pages 168-169

FUSE BOX

8min
pages 170-174

TRANSMISSION AUXILIARY SYSTEM

2min
pages 166-167

STARTING THE ENGINE USING BOOSTER BATTERIES

1min
page 165

BATTERY SERVICE

1min
page 164

ALTERNATOR BELT AND AIR CONDITIONING COMPRESSOR BELT

1min
page 159

TORQUE SPECIFICATIONS FOR SEAT AND SEAT BELTS

1min
page 157

BATTERY SAFETY

1min
page 163

CHECKING OF THE PARKING BRAKE

2min
pages 153-154

ROLL-OVER PROTECTIVE STRUCTURE (ROPS

4min
pages 155-156

TANDEM

1min
page 150

REAR AXLE

1min
pages 148-149

FUEL SYSTEM

4min
pages 136-139

GREASE FITTINGS

3min
pages 122-126

ENGINE COOLING SYSTEM

4min
pages 132-135

ENGINE HOURMETER

1min
page 112

HYDRAULIC TANK AND ENGINE FUEL FILTER

1min
page 121

TRANSPORTING AN OUT OF SERVICE MACHINE

2min
page 106

TYPICAL OPERATION

4min
pages 103-105

OPERATION

10min
pages 97-102

JUMP START

6min
pages 94-96

BEFORE STARTING THE ENGINE

2min
pages 89-90

BOOSTER BATTERY CONNECTIONS

1min
page 93

RUN-IN

1min
page 92

OPERATORS SEAT

2min
pages 81-82

AIR CONDITIONING, HEATING AND AIR CIRCULATING SYSTEM

3min
pages 79-80

PARKING BRAKE (845B AND 865B MODELS WITH ZF TRANSMISSION

1min
page 78

GRADERS OPERATIONS WITH FUNK TRANSMISSION

3min
pages 76-77

MAINTENANCE

8min
pages 24-26

BEFORE OPERATION

2min
page 16

FIRE OR EXPLOSION PREVENTION

2min
page 21

MACHINE OPERATION

5min
pages 17-18

TO THE OWNER

1min
pages 7-8

GRADERS OPERATIONS WITH ZF POWER-SHIFT TRANSMISSION

6min
pages 73-75

SAFETY RULES

1min
page 15

OPERATOR’S COMPARTMENT

1min
page 39
Issuu converts static files into: digital portfolios, online yearbooks, online catalogs, digital photo albums and more. Sign up and create your flipbook.