CHAPTER 6 – LUBRICATION / FILTERS / FLUIDS
GREASE FITTINGS
Each 100 hours services Litium based Grease with Molydissulfide (NLGI-2)
Moldboard Lift Cylinders Balls There are 2 lube points. Lubricate with 6 to 12 shots each.
Articulation, Hydraulic Cylinders and Pivot Joints There are 4 lube points, 2 on each side. Lube with 6 to 10 shots on cylinders ends. Lube, with 6 to 14 shots on pivot bearings.
3
Lift cylinders ball joint
Drawbar Ball and Socket There is 1 lube point. Lubricate with 6 to 14 shots.
2
1
1. Articulation cylinders joints 2. Lower articulation joint 3. Upper articulation joint
Moldboard Tilt Cylinders Balls There are 2 lube points. Lubricate with 6 to 12 shots each.
Drawbar ball and socket
TILT cylinder ball joint
116