Electrical system – 5000 Functional description Order number 235568-040
Date 2006-04-10
Valid from serial number 904526-
T-code 795
10.8.4 Battery charge status The battery status indication LED [H81] gives an indication as to the remaining charge capacity in the batteries.
Table 12: Battery charge status LED Status [H81]
Remaining battery charge
Off
> 60% charge remaining
Blinking
< 60% charge remaining
Continuously on
< 40% charge remaining
Battery display (option) A more detailed display regarding the battery charge status is available as an option. The battery display is connected to the hand terminal connector [CONS] on the transistor regulator [A1]. The display (Fig. 12) has 4 green LEDs and 1 red LED which indicate the battery charge status according to the following table.
Table 13: Battery display LEDs Battery power LEDs 100 %
4 green LEDs
70 %
3 green LEDs
60 %
2 green LEDs
50 %
1 green LED
40 %
1 green LED flashes (means time to charge)
35 %
1 red LED
Fig. 12 Battery display (option) 30 % 25 %
1 red LED + reduced speed 1 red LED + extremely reduced speed
NOTE! The battery display is only updated when the drive motor is active. That means if only the lift motor is used for some time (and the truck is not moved) the display may show a too large remaining charge.
© TIEE SARL
Service Manual
SP10, SP10S
10- 21
