Electrical system – 5000

If an error condition is present on the truck it will be immediately displayed.

•Refer to Table 15, “List of error codes,” on page 28 NOTE!

Fig. 16 Typical error display *MAINMENU*

The status LED is continuously on while the hand terminal is connected.

Error code history

To check the error code history log carry out the following: With the hand terminal connected as described in previous section... Navigate to the ALARM menu.

The log will display up to 5 most recent error types with the following information for each error.

A - Error code description.

B - Hour meter value when fault occurred.

C - Number of occurrences of specific error.

D - Transistor regulator temperature when fault occurred. The error code history log can be optionally cleared when exiting the ALARM menu.