Electrical system – 5000

Parameters & adjustments

10.10 Parameters & adjustments

10.10.1 General

The truck’s control system stores a number of parameters. These parameters are used to configure the truck for correct operation in the particular application for which it was designed. The parameters are adjusted using the hand terminal.

10.10.2 Adjusting parameters

To adjust a parameter use the PARAMETER CHANGE function in the hand terminal:

•Connect hand terminal. See “ Connecting the hand terminal” on page 23

•Select PARAMETER CHANGE from the menu and press ENTER.

•Press ROLL buttons to display the required parameter.

•Adjust the setting of the parameter with the PARAM SET buttons.

•Press OUT followed by ENTER to store the new parameter setting or.

•Press OUT followed by OUT to return to the main menu without changing the existing parameter setting.

NOTE!

Truck handling.

Modifying specific truck parameters will change the driving characteristics of the truck. Do not change any parameters without the necessary know how.