T025052E
Display Panel 1 1
2
3
17
20
5
m deg
15 14
16 21
6
18
13
％ deg
7 19
17
12 8
11
10
9 T21760
1. Jib angle display When jib lift is selected, the jib angle offset is displayed. When the upper boom angle restriction function is registered, the registered upper boom angle restricted value is displayed as long as the register key is pressed on.
9. Load radius limit restriction indicative symbol Comes on to indicate that the value shown in the load radius display 11. represents the load radius limit. Note that the load radius indicative symbol 10. is also displayed at the same time.
2. Number of part-lines of indicative symbol This symbol shoes that the jib angle display (1) indicates the number of part-lines of rope
10. Load radius indicative symbol Indicates that the value shown in the load radius display 11. represents the load radius.
3. Boom length indicative symbol This symbol, while marked up, means the value in the boom length display 13. is a boom length value.
11. Load radius display Normally displays the crane's load radius. When the load radius limit restriction function is activated, the load radius limit restriction value is displayed while the register key is held down.
4. ─ 5. Jib angle indicative symbol Comes on to indicate that the value shown in the jib angle display 1. represents the offset angle.
12. ─ 13. Boom length display Usually displays boom length. Displays the lifting height while the display alteration key is pressed. When the lifting height restriction function is effective, this displays lifting height restriction value, while the register key is being pressed.
6. Jib lift indicative symbol Lights when the jib lift (32.2 ft or 56.1 ft) is selected. 7. Real load display Displays the real load. 8. Rated lifting capacity display Displays the rated lifting capacity.
Load Moment Indicator (AML-L)
14. Lifting height indicative symbol This symbol, while marked up, means the value in the boom length display 13. is a lifting height.
67
Load Moment Indicator (AML-L)
