Heating/ventilation/air-conditioning Auxiliary heating operation (option) 1 2 3 4 5 6 6.1 6.2 6.3 6.4
Time button: Display time/set time (press for longer than 2 seconds) Program selection: Heating start preset time: display, set, delete Instant heating: Switch auxiliary heating on and off manually Back Forward Screen display Operating display Weekday Time display Storage location
Auxiliary heating operation (option) Danger. Risk of explosion and suffocation. Heater operation is not permitted: at filling stations or fuel dispensing systems, in places where ignitable vapours or dust can accumulate (e.g. in the vicinity of filling stations, fuel depots, or coal, sawdust or grain stores), in enclosed spaces (e.g. bus depot).
buttons are lit when the heater is in operation. All symbols flash in the indication display after the power supply is connected. The time and the weekday must be set.
Note: If the ignition switch is switched off and the heating unit is in continuous heating mode, a remaining time of 15 minutes appears in the display and the heating unit continues to operate.
Caution: The heater must be operated at least once a month, with the engine cold, for at least 10 minutes
Note: The timer can be used to preset the heating start time for a period of up to seven days. It is possible to program three switch-on times, although only one can be activated. The clock displays the current time and the weekday when the ignition switch is switched on. The display and CITARO (G) CNG/03.2012 GB
183