Care/cleaning of micro-fibre covers

Care/cleaning of micro-fibre covers

Danger.

Observe the general information/safety notes in this section.

Note:

Regular care and basic cleaning help to maintain the value and high-quality appearance of micro-fibre and wool covers. For this reason, carry out basic cleaning regularly. Carry out basic cleaning more regularly, depending on use and the level of dirt.

Basic cleaning - weekly

Vacuum the covers following the nap of the fabric, without applying pressure.

Caution:

Do not use vacuuming nozzles made of rubber or rubber components. These could pull threads out of the upholstery covers.

Brush covers following the nap of the fabric using a soft brush, without applying pressure.

Basic cleaning - every six months

First carry out the weekly basic cleaning.

Make a foam from a mild, lukewarm soap (e.g. from a mild-action detergent).

Apply the foam evenly over all the covers using a soft, slightly damp sponge.

Wait until the freshly cleaned covers are completely dry. Operation

Care/cleaning of micro-fibre covers

Caution:

The covers must be completely dry before they are used again. Permanent pressure marks could otherwise form.

Brush following the nap of the fabric using a soft brush, without applying pressure.

Removing stains

Caution:

Remove dirt as quickly as possible to avoid permanent stains and prevent damage to the covers.

Caution:

Do not use cleaning products containing solvents (e.g. cleaning benzine, acetone, alcohol, etc.). This would damage the micro-fibre covers and equipment parts made of plastic or foam beyond repair.

Remove as much dirt as possible using a lint-free cloth.