1 minute read

Ignition switch

the mode of operation. Alternatively: set brake cruise control and push knob 1.4 in on the combination switch at the same time: the current speed is set (e.g 62 mph (100 km/h)) and shown on the display screen and drive cruise control is automatically set to a value which is 2.5 mph (4 km/h) lower (e.g. 59.5 mph (96 km/h)) at the same time. Cruise control automatically switches between the modes of operation depending on requirements. The display on the display screen changes to one value or the other depending on the mode of operation.

Engine speed increase

Precondition: bus stationary, engine running.

1.1 The engine speed can be increased up to a maximum of 750 rpm. 1.3 Engine speed increase off, normal idling speed

Ignition switch

Danger.

Never lock the steering when the bus is moving. If you leave the bus, even for a short time, always remove the key so that the bus cannot be started by children or other unauthorised persons.

M54_00-0083-01 0 Rest position: Insert or remove the key in this position; the side lamps can be switched on. 1 Steering unlocked: All consumer units can be switched on. 2 Drive position 3 Starting position

Driver's area controls

Ignition switch

This article is from: