
1 minute read
Malfunction displays: Red warning level - overview
Driver's area controls
Malfunction displays: Red warning level - overview
Note:
Depending on the type of malfunction, the same symbol may be displayed with a different malfunction text, refer to symbol (10) for example. 1 Brake pressure signal malfunction 2 Supply pressure too low (brake circuit 1) 3 Supply pressure too low (brake circuit 2) 4 ABS/ASR failure 5 Drive control failure 6 Engine control failure (CNG system malfunction) 7 Transmission malfunction 8 Transmission oil too hot 9 No oil pressure 10 Oil level too low, check oil level 10 Engine oil replenishment failure. Oil level too low, check oil level. (Only in buses with automatic oil replenishment) 11 Coolant too hot 12 Hydrostatic fan drive malfunction 13 Door system malfunction 14 Emergency valve operated 15 Level control failure 16 Boarding aid malfunction 17 Fuel level too low 18 No battery charge 19 FPS module 1 malfunction
Driver's area controls
Note:
There may be up to 8 FPS modules in the bus. The number (1...8) referring to the module concerned is shown after the malfunction text 20 Headroom clearance warning 21 Engine compartment fire message 22 Roof hatch emergency release 23 Anti-jackknifing system malfunction (articulated buses only) 24 Auxiliary steering malfunction (only in buses with trailing axle) 25 Engine compartment fire