1 minute read

Rotary light switch

Driver's area controls

Rotary light switch

Rotary light switch

combines the following functions:

M54_00-0068-01 0 Switched off 1 Side lamps 2 Headlamps Dipped-beam headlamps/main-beam headlamps (depending on the steering column switch position) with the ignition switch in position 2 (drive position)

Note:

In countries where traffic drives on the opposite side of the road to that in which the vehicle is registered, there is a risk of dazzling other users with asymmetric dipped-beam headlamps. Observe the country-specific legal requirements when driving in these countries (mask headlamps if necessary). 3 Front foglamps (pull switch, first position). In addition to the side lamps, dipped-beam headlamps or main-beam headlamps when the ignition switch is switched on 4 Rear foglamp (pull switch, second position). In addition to the front foglamps. The indicator lamp in the rotary light switch lights up. When a trailer or skibox is connected, the rear foglamp on the towing vehicle is disabled and only the rear foglamp connected via the trailer socket is enabled.

This article is from: