1 minute read

Switching fans on and off - code HH2/HK1

Heating/ventilation/air-conditioning Switching fans on and off - code HH2/HK1

Press the lower section of pushbutton (4). The fans switch off. The indicator lamp in pushbutton (4) goes out.

Note:

The fans switch off automatically if the interior temperature is too low or air-recirculation mode is switched on.

Automatic fan switch-on/switch-off is enabled again.

Switching fans on and off - code HH2/HK1

Note:

Precondition: engine on.

Note:

Automatic fan switch-on/switch-off is enabled whenever the engine is started.

M54_00-1319-71

Press the upper section of pushbutton (4).

The fans start to run.

The indicator lamp in pushbutton (4) lights up.

Note:

The fans start up automatically if the output of the interior blowers rises to approximately 70 %. – air-recirculation mode is not active.

Press the lower section of pushbutton (4). The fans switch off. The indicator lamp in pushbutton (4) goes out.

Note:

The fans stop automatically if the output of the interior blowers falls below approximately 62 %, if air-recirculation mode is active or if automatic passenger-compartment regulation is not active. Heating/ventilation/air-conditioning

Switching fans on and off - code HH2/HK1

This article is from: