Lubrication Oil Engine Oil Refer table A for oil specifications. Other oils can be used if they meet minimum requirement of : API service classification CF4 + Mb228.1 CCMC D-4 / G-4 / PD-2 MIL - L - 2104E. Multi-Viscosity Diesel Engine oils are preferred. Selecting the Viscosity of Engine Oil (EO) During cold weather the selection of oil should be based on the coldest anticipated operating temperature to make starting easier. During hot weather, selection should be based on the highest anticipated operating temperature. When the prevailing temperature changes substantially, even though the regular intervals of lubricant change have not been reached, the lubricant must be changed. Refer Oil Specifications Chart for oil specifications at different range of ambient temperatures. Ambient temperature conditions in other range warrants other SAE grade of oil as per illustration.
Note : If diesel fuel with sulphur content greater than 0.05% is used, reduce the service interval by 50%.
Note : It is not necessary to change the lubricant when the temperature enters into a different range during a working day, unless difficulty in starting is experienced. Change oil if the tractor is not used for 6 months. PRECAUTIONS : After changing the oil, operate the engine at low speed without load, for at least 5 minutes. This will allow the oil to work into the bearings and onto the cylinder walls. * Factory filled oil is 15W40 and may change in future. * Factory filled oil is Enclo 46 and may change in future.
35 Series-HST, Model - 3535, 4035, 4535 & 5035
Downloaded from www.Manualslib.com manuals search engine
81
