Lubrication Oil

Note : If diesel fuel with sulphur content greater than 0.05% is used, reduce the service interval by 50%.

Note : It is not necessary to change the lubricant when the temperature enters into a different range during a working day, unless difficulty in starting is experienced.

Change oil if the tractor is not used for 6 months.

PRECAUTIONS :

After changing the oil, operate the engine at low speed without load, for at least 5 minutes. This will allow the oil to work into the bearings and onto the cylinder walls.

* Factory filled oil is 15W40 and may change in future.

* Factory filled oil is Enclo 46 and may change in future.