Switches Switches Combination Switch: It is located in LH side of steering column on dashboard. It consists of: 1. Horn (in centre) 2. Light Switch 3. Turn Signal Switch Horn Pressing the horn switch will blow the horn. Light Switch It is a 4 positions rotary switch. It operates in clockwise direction and positions are as follows: 1. Off 2. Illuminate Parking Lamps 3. Illuminate low beam of head lamps & Parking Lamps 4. Illuminate high beam of head lamps & Parking Lamps Turn Signal Switch This is 3 positions rotary switch. The vertical position of knob operates in both directions and the positions are as follows: 1. Vertical - OFF 2. Left - Operates LH Turn signal Lamp 3. Right - Operates RH Turn Signal Lamp Starter Key Switch It is a key operated 3 position rotary switch. It is located on RH side of steering column on dashboard. It operates in clockwise direction and positions are as follows: 1. Off 2. It gives readiness to electrical circuit for operation of plow lamp switch, combination switch, instrument cluster. 3. Activates the starting circuit for engine.
Work Lamp Switch It is a 2 positions rotary switch located in LH side of steering column on dashboard. It operates in clockwise direction and positions are as follows: 1. Off 2. Illuminates the plow lamp
36
Downloaded from www.Manualslib.com manuals search engine
Note : The Starting circuit is interconnected with the Forward / Reverse system. Thus the Engine will not start unless the Forward / Reverse pedals are in neutral.
35 Series-HST, Model - 3535, 4035, 4535 & 5035
