Control, operation
Operating manual
Working with the machine
secured. equipment has all required lighting and marking, and observe any applicable load limitations. s of poor visibility or darkness.
are carried out immediately. ear of all personnel before beginning work. operating manual. long as the machine is still moving. while the diesel engine is running. d and be aware of any stability limitations these loads may create. depends on the attached equipment as well as the substrate. as close as possible to the ground. EXCEPTION: see WHEN LOADING AND UNLOADING
uphill, never sideways on a slope. e permitted speed or you could lose control over the machine. Shift to a lower gear to allow the engine to control the maximum speed of the machine. rock protection is present. clearings, hoisting operations, etc. overview of and whenever necessary, ask for assistance of a guide. Have only one person signal you. operator. The guide must position himself within view of the operator or be in voice contact with him. nt combination, there can be a danger of collision cylinders. To avoid damage, utmost attention is required when the bucket teeth enter this range.
3.4.1.2
Use in material handling applications, specifically when travelling with raised loads and attachments using a grapple, may require travel with suspended loads. Doing this will shift the machine centre of gravity and reduce stability. The following practices and precautions should be observed: e changed machine characteristics and surrounding conditions.
copyright by
3 - 58
R 984 C Litronic High Rise / 11140259
