Control, operation

Press the BACK button. The error message is acknowledged and stored. The buzzer is switched off.

Field TI

Indicates the operating hours of the machine, the daily counter and the currently selected working tool.

The ® indicates that limitation settings are activated.

Field INF

This field shows information regarding the current status of the machine (symbol or text).

If more than 3 symbols are to be displayed, they are moved across the screen from left to right by one symbol every 10 seconds.

3.1.5Information symbols on the main screen

SymbolDescription

Preheating

This symbol is displayed during preheating, indicating to the operator that the diesel engine must only be started after preheating is completed.

End of preheating

This symbol is displayed when preheating is completed. It remains visible for approx. 2 seconds on the screen and indicates to the operator that the diesel engine can now be started.

Service interval indication

This symbol is displayed for a short period prior to starting the ignition, if a service is due.

Acknowledge error

This symbol is displayed if a machine fault or error occurred. It is accompanied by a buzzer signal. To acknowledge the error and switch off the buzzer signal, press the Back button.

Overload warning system*

This symbol is displayed, if the overload warning system* is switched on and the maximum permissible load of the machine is reached.

It indicates to the operator that the load must be reduced.

No overload warning system copyright by

This symbol is displayed, if the operator attempts to switch on the overload warning system* in a machine that is not equipped with this function.

It indicates to the operator that the machine does not feature an overload warning system.

Hoist cylinder warning system: Danger

This symbol is displayed, if the actual load is near the load limit of the hoist cylinders. It warns the operator that a further increase of the load could result in a sudden lowering of the attachment.

The operator must reduce the reach of the attachment or lower the load to the ground without extending the reach.

Emergency operation of diesel engine

This symbol is displayed if the diesel engine is run in emergency mode.

It indicates that, in emergency mode, the speed can be adjusted with an additional switch. The machine must only be operated in emergency mode for limited periods.

Emergency operation of control devices: Danger

This symbol is displayed if the emergency control mode is activated.

It indicates that the control devices are set to emergency mode. The machine can thus not be operated as normal, and there is an increased risk of accidents.

The machine must only be operated in emergency control mode for a limited period of time and by operating personnel who know how to operate the affected functions.

Emergency operation of control devices of brake

This symbol is displayed if the emergency control mode is activated.

It indicates that the parking and slewing gear brakes are in emergency mode and cannot be operated through the normally used switches.

Emergency operation of servo control

This symbol is displayed if the emergency control mode is activated. It indicates that the servo control cannot be operated through the normally used switch.

*

3.1.5.1Operator's menu

Changing to operator's menu:

Fig. 3-7 Main screen

To change to the operator's menu, you must first call up the main screen. Press the Menu button on the main screen. The operator's menu is displayed. The list of the accessible submenus is indicated by symbols.

copyright by