Control, operation
Operating manual
Working with the machine
Adjusting inner shut-off point (MIN):
Fig. 3-72
Adjusting limit switch (MIN)
Move the boom upwards. Retract the industrial stick all the way to the desired shut-off point (MIN). Switch off the diesel engine and push the safety lever upwards. Loosen the screws 1. Move the connecting link 2 until the outer edge enters the stress field of the limit switch 3. Tighten the screws 1. Check the stick cylinder shut-off function. If necessary, repeat the adjustment and check the settings again. Adjusting outer shut-off point (MAX):
Fig. 3-73
Adjusting limit switch (MAX)
To adjust the settings for a limited forward working range, lower the boom so that the attachment is positioned close to the ground. Extend the industrial stick all the way to the desired shut-off point (MAX). Switch off the diesel engine and push the safety lever upwards. Loosen the screws 1.
copyright by
3 - 70
R 984 C Litronic High Rise / 11140259
