RIPP Supercharger JEEP Wrangler 3.8
Step: (5) Installing Battery Relocation kit
Located on the passenger side of the engine compartment behind the headlight is the plastic base to the OEM air filter box. This will need to be removed and replaced with the supplied battery tray. Remove 10mm bolts as shown in first illustration.
Two cuts will need to be made 1) the first will be going from the fender towards the engine. 2) The second cut will go from the front of the bracket towards the back of your Jeep. CARE NEEDS TO BE EXERCISED DURING THE SECOND CUT-PERMANENT DAMAGE CAN AND WILL OCCURE TO A MAIN WIRE HARNESS. Located along the inner chassis are two main engine harnesses, if these are damaged during the cutting process permanent damage can and will occur. Space back the bracket to make room for the cutting blade and cut slowly
*Harness will interfere: make room by back spacing as per last illustration*
Utilizing the factory 10mm mounting holes install the supplied battery tray as shown in last two illustrations, tighten. 5
Copyright RIPP Modifications LLC 2008 all rights reserved
